Everbuild Facades One Coat GPR General Purpose Render 25kg FACGPRGY25
Sika Code 636028
Barcode 5055492703194
Everbuild Facade One Coat GPR General Purpose Multi Use Render that comes in a ready to go 25kg bag. Everbuild Facades One Coat is a weather resistant and waterproofing grey render that can be used both internally and externally, for general rendring of walls. One Coat GPR has a grey finish and is classed as a finishing render, equally can be used as a base coat for use prior to receiving a decorative finish such as tiles or brick slips.
Everbuild One Coat can be used by machine or standard manual trowel applied applications and is suitable for masonry and conceter walls. Everbuild GPR is overpaintable and weather resistant.
Benefits and uses of Everbuild Facades Render:
- Large 25kg bag.
- Suitable for small areas patching and large projects
- Fast strong and easy to use.
- Suitable for internal and external use.
- Grey in colour.
- Weather resistant.
- Breathable
- Overpaintable
- Mixing ratio is easy 4.5 litre to 5.5 litre of water to a 25kg bag
- Can be used at temperatures between + 5 Deg c and + 30 Deg c.
Everbuild One Coat Facade Render is Compatible With:
- Brick
- Lightweight and dense aggregate concrete blocks
- Masonry
- Clay Blocks
- Breeze blocks
- Standard low and normal density lightweight aircrete blocks
- Stone
- Formed Concrete
- Insulation Blocks
- Clean well adhered existing renders
- Everbuild 503 SBR Bond
- Everbuild 507 Rendagrip
- Plastic and Galvanised Profiles
Application of Everbuild One Coat Facades Render
- Apply the first coat levelled and lined to a depth of approximately 10mm thick and leave with a toothed trowel finish or scratch up.
- Apply the second coat to a minimum of 5mm and finish using a stainless steel trowel or float depending on the desired effect.
- Where depths have to be made up stick to the application depths repeating the operation to the desired level with appropriate drying as per normal practises.
Base Coat Applications for alternative finishing
- Apply a base coat finish for receiving tiling or brick slip finish.
- Apply one compact 15mm thick coat and leave with toothed trowel finish for added adhesion.
Preperation of Surfaces
- Substrates must be clean, sound, dust free, and free of any material that may prevent adhesion see technical data sheet
- Ensure the substrate is free from oil and grease and remove all traces of plaster, paint etc
- If the surface has limited or no porosity, e.g. shutter concrete or wet patchy substrates, or ones involving several substrates, prime with Everbuild 503 SBR Bond diluted 3:1 with clean water and allow to dry
Then add a bonding coat of 1:1 Everbuild 503 SBR Bond with clean water mixed with 1.5 parts cement and apply Everbuild Facades One Coat GPR whilst still tacky. - Alternatively use the more popular modern method use Everbuild 507 Rendagrip adhesion promoter for the perfect surface, following the product application guide buy roller or brush.
Everbuild Facades One Coat Render Demonstration Video
FACGPRGY25 Official Datasheets:
Everbuild One Coat GPR Render Instructions Technical Data Sheet
Everbuild One Coat GPR Product Page
All Cements and Repair Compounds
Data |
Manufacturer |
Everbuild |
Reference Code |
FACGPRGY25 |
Reference Code sika |
636028 |
Type |
General Purpose Render Render |
Size |
25kg |
Group |
Fascades |